Discussion in 'THE ARCH' started by GekiDan, Mar 14, 2010.
welcome again sa bago.... bkt umabot tayo sa 2nd page....dapat 1st page lagi...
Eh wala na kasing nagpopost...
Teka, can we have a list of people who will be attending Ozine on the 9th and the 10th?
80-20 ako .. so most likely pupunta tlag ako
Gusto ko man magpunta ng 10... di pwede... walang pera...XD
pepakura for noobs
What is Pepakura?
Pepakura Designer allows you to create a development for paper craft easily from 3D data used in 3D CG software. You can load a 3d image and make adjustments (not featured in this tutorial) or you can load already saved files from Pepakura and print them out to assemble a 3d object using only paper!
What is pepakura printed on?
The .pdo files that are shared here are saved to be printed on A4 paper. This is a universal standard size paper. To use 8 1/2" x 11" paper (Letter) or 8 1/2" x 14" paper (Legal) we will have to change the settings and manipulate the images to make sure they fit on the paper. But don't worry, we will cover that in this tutorial. ;-)
What type of paper works best?
If you are planning on using the print-outs from Pepakura to place onto another medium (such as cardboard or foam board) you can easily print the designs on regular computer or copy paper. However, if you plan on using your printed pieces of paper as your main structure, I recommend printing on card stock paper. You can find bundles of card stock at just about any paper store, or for a much easier (and probably cheaper) find, head over to your local school supply and book stores.
Part I: Downloading Pepakura
To download Pepakura, you will need to visit the URL below, which is Pepakura's website and download the pepakura viewer program:
From here, you will want to select "Download" from the left. Once on the download page, select Pepakura Designer. Once that is selected, follow the download and installation instructions on that page.
pepakura viewer and designer tutorial vids
[ame="http://www.youtube.com/watch?v=7K499GEHcLU"]YouTube - Broadcast Yourself.[/ame]
[ame="http://www.youtube.com/watch?v=skDydmMVRUI"]YouTube - Broadcast Yourself.[/ame]
How To Make Good Folds For Pepakura Armor
This is a tutorial on how to fold the lines on Pepakura correctly and clean.
1. The supplies for this folding method that you will need are:
- 2 pens (try using 2 different colors)
- 1 ruler (metal rulers work best for this)
2. First you must assign the pens to a certain fold. (remember you must keep them the same through out the process)
Pen = Valley fold lines
Black Pen = Mountain fold lines
NOTE: In some cases it is seen that a models valley fold and mountain fold line style is swapped to the opposite line style**
3. Cut out the piece you are going to be folding.
4. Set up the Ruler so it is parallel to the line you are going to score, make sure that it is a bit close, as seen here:
5. Then, your going to want to take the pen you assigned to valley fold or mountain fold and go over the line 3 or 4 times pressing semi hard with the ruler as a guide to keeping the pen straight and on the original line.
6. Once you have done that, you may fold the paper accordingly to come out as a nice clean fold.
Pepakura Folding Tutorial
This next folding technique requires the use of sharp utensils so please be very careful upon doing this.( I am not responsible for any injury that can occur! )
This next tutorial is for all you veteran folders out there who don't feel the need to use pens in order to fold your armor.
(So if you are a first time folder I suggest you look at the first tutorial of this topic to learn more.)
Alright then, some of the things your going to need for this procedure are:
-An X-acto Knife
-a couple of spare X-acto blades
-One metal ruler
-Something to work on that will not allow the pressure of scoring to bleed through onto a nice table/counter top.
1. First, cut out the piece that you will be scoring.
2. Next, Position the piece so that there is enough room to move your X-acto knife and arms freely.
3. Then, taking the side of the X-acto knife, you'll need to gently make a small crease, using the ruler as a guide. Its your choice on whether or not to use the blunt or sharp side, but my advice is to use the blunt side, to ensure that you don't cut the flap off.
(DON'T PUSH TO HARD OR YOUR FLAP MAY COME OFF! *REMEMBER* YOUR NOT USING PENS ANYMORE, SO IT'S IMPORTANT TO REALIZE HOW MUCH PRESSURE YOU ARE PUTTING INTO YOUR SCORE.)
4. After you have done your score you may now fold your paper to its proper shape. [/i]
Ui nice o.... gusto ko ng Rider...XD
Nasend ko na sa FB inbox mo.
Thanks ng malaki Alex! :buttrock:
wag nyo na ako pasalamatan tagal na nating magkakasma dito eh ang gusto ko lang makita ay may makatapos kahit isa lang sa inyo happy na ako hehehehe
Hahaha yun yun eh. :thumbs: Kitakits nalang sa Ozine para dun sa ibang details.
Just wanted to share:
Hahaha G3-X and G4 has gotta be one of the best SH Figuarts releases ever. :buttrock:
Ready na kayo sa Sunday?
Hahaha malapit na mapakita yung teaser ko. :169:
Wait ko yan. saka imba yung yung Faiz phone mo... Nakaka-access sa Facebook... XD
Siyempre naman! Malupet ang Smart Brain noh? Naisip nila lagyan ng web-browsing capabilities ang Faiz Phone ko. :laugh:
Mod ko rin kaya Wolzaphone ko saka ShoudoPhone...
Hahaha pwede din! :laugh:
Separate names with a comma.